Outer Socket Lock Nut : 59 - 78 N-m 6. Never pull on the hook at an angle. Which makes receiving inside and out much easier, specifically to the third row of seats. Components shown in an illustration may be identified by a circled number. Put merely, the Rogue seems like it might use far more body insulating material, although we realize that might add more weight.
Even with the latest pattern towards seven-passenger chairs, the Rogue seats 5 various. Check the adjustment To adjust the head restraint forward or backward after someone else uses the seat. A circular pod completed in a smooth dark material juts from the center of the dashing property the weather and audio regulate and the shifter, taking them closer to the driver. Do not insert any object other than the same type male terminal into female terminal. Be sure that the seal is installed properly. Please read through thismanual before operating your vehicle. Do not use E-85 fuel 85% fuel ethanol, 15% unleaded gasoline unless the vehicle is specifically designed for E-85 fuel i.
Canada Aftermarket Cross- reference Part Nos. Standard value: Tolerance at inspection and adjustment. While moving the connector, check whether the male terminal can be easily inserted or not. Little or no resistance will indicate that portion of the circuit has good continuity. Spare tire, jack, hand tools and mats in designated positions. The Computer Controlled system operations can be adversely affected by any variation in resistance in the system. Detectable Lines and Non-Detectable Lines In some wiring diagrams, two kinds of lines, representing wires, with different weight are used.
If the seal is missing, the waterproof performance may not meet specifications. Otherwise, the vehicle body will be damaged. If water is found in the control unit, dry it fully and then install it in the vehi- cle. The illustrations should be used in reference to service matters only. The styling is swoopy, with round outlines and a wedge condition from top to rear. Assembly, inspection and adjustment procedures for the complicated units such as the automatic transaxle or transmission, etc.
A visual inspection may not reveal this without disconnecting the connector. Nissan has arrived a very long way in this regard. This standard is applicable to bolts having the following marks embossed on the bolt head. The Quest deals with effectively. This can be simulated by soaking the car or running it through a car wash. Action items Next action for each test group is indicated based on result of each question. By lengthening the wheelbase and shortening the front side and rear overhangs, makers created a swooping roofline whilst enlarging the interior place.
This lighting up indicates that the anti-theft is not functioning, so prompt service is required. Such resistance variation may be caused by poor connection, improper installation, improper wire gauge or corrosion. Vehi- cle vibration can aggravate a harness which is routed along a bracket or near a screw. If it occurs, repair or replace the component. After repairs, re-check that the problem has been completely eliminated. When the circuit operates, this single strand of wire is not able to carry the current.
When working in a pit or other enclosed area, be sure to prop- erly ventilate the area before working with hazardous materials. This ensures you get the job done right the first time. A must have for any Nissan owner and comes in very handy when ordering parts or making repairs. Do not force the male terminal into the female terminal with your hands. Test group number is shown in the left upper portion of each test group. Its back seats are as roomy and comfortable as individuals of any minivan.
Then you will be able to use the appropriate equipment and follow the correct test procedure. If repairs are needed always use wire that is of the same or larger gauge. To help in understanding the diagnosis of open circuits, please refer to the previous schematic. Ground connections are often exposed to moisture, dirt and other corrosive elements. Static electricity may damage internal electronic components. Also, do not allow them to strike adjacent parts, especially the brake tubes and master cylinder. In such cases you will want to check for a heat sensitive condition.